Block Paving Driveways Sunderland

Get An Online Estimate

Or Call: (020) xxxx–xxxx

A popular driveway surface is block paving. Block paving has several advantages over other driveway components, such as gravel or concrete, including cost-effectiveness and durability. However, if you don’t know what you’re doing, installing block pavement may be tricky!

In this post, we’ll look at how block paving companies use appropriate methods and tools, who performs the most of the labour in your area, as well as some things to consider before having your driveway paved with blocks.

Pavements are generally built of concrete or crushed rock that has been combined with sand, cement, and water. The blocks are often manufactured from concrete or crushed stone with sand, cement, and water.

Blocks may also contain components other than wood, including composite material for stability and durability, salt to lower the freezing point, and small stones to cut weight.

Concrete paving is a popular material choice for driveways, sidewalks, and verandas. It’s a fantastic choice for high-traffic outdoor areas since it can resist the elements.

Advantages of Block Paving Driveways

A surface that can stand up to various weather conditions in which significant snow is anticipated throughout the year. The following are some of the benefits:

  • It has a reasonable price.
  • Paver blocks are easy to install and need a spade, wheelbarrow, and concrete tamping rod to do so.
  • Block paving may be used for a wide range of purposes, including home improvement projects since it can be applied over almost any surface contact.
The Block Paving Process

Pavements constructed from compacted gravel are frequently called “paving above the ground” because a compressed gravel base must be laid over an even surface of stone bricks or slabs to build new parking lots, walkways, and sidewalks.

The materials used to create paved block areas are as follows:

  • Natural stone.
  • Concrete pavers
  • Cobblestones
  • The bricks are embedded in a sand-cement mortar with asphalt covering.

Hand-laying block paving can be done one block at a time. In contrast, as a specialist block paving business, we utilize sophisticated equipment to install them.

These systems construct numerous layers of cement paver components on top of a prepared surface to create a unified road surface. This increases installation speed and reduces labour for previous technologies, lowering costs.

  • Using a hammer drill to create holes in hard ground is an efficient approach.
  • To remove any debris that may have fallen into the hole, begin by cleaning the surrounding area with a washcloth or towel.
  • The chisel’s square tip is used to trim block edges so they can be firmly inserted.
  • The sealant is then brushed onto the cracks and seams between the blocks’ surfaces using a paintbrush.
  • A block cutter, a block extractor, and a block knife are included.
  • Before block paving, the sub-base is replenished with gravel using a shovel or other tool.
  • Batty wooden block spacers, also known as ‘bats,’ are used to create tiny gaps between your blocks while they’re being positioned – since it offers a more uniform look when all of the pieces are completed!
Block Paving Installation Steps
  • Before we can start, we’ll need to collect readings, select a location, and clean the area of any dirt particles.
  • Finding the optimal sub-base depth is straightforward. It’s generally about 17 centimetres below the surface.
  • Adding a small layer of sand over the entire area where we will set the blocks
  • Install wooden spacers before starting the first block, placing the second block against the previous one, ensuring adequate distance between them for the following column, and then adding more woodblocks to complete the room.
  • We make sure there are gaps between each row.
  • We guarantee that the blocks are arranged in such a way as to ensure solidity. (To avoid difficulties, we give the correct number of blocks for your project and have them on-site.)
  • The bricks are pressed with an iron roller, which is used in a gradual, uniform manner across the entire surface and rolls smoothly and gently to minimize harm to the bricks.
  • Once the block is sufficiently compressed, there will be no gaps between individual bricks, and hitting them together will produce a “clunk.”
  • Concrete mixtures (mixture) made with cementitious materials (blend) can be blended in gradually with water until the required balance is achieved. This mix may be poured over block foundations and blocks built on top of one another. If we want to design a block, we use a mortar and pour it on top of it.
  • Allow the mortar to dry thoroughly before continuing. Using a hand trowel or a masonry knife, carefully spread the mortar until it is about 1/2 inch thick. Allow every block layer to dry before adding another if you’re utilizing multiple layers for your job.
  • Water-based tiling is not recommended for floors with ceramic tiles, as the mortar must permeate down into the gaps between the bricks and level out over time as the weight of other blocks compresses them.
  • To get the most out of your space, make rows made all along one side and then progress forward.
  • When laying down blocks, use push blocks firmly but not too hard against one another. Block paving in the United Kingdom is a delicate job that requires attention to detail.
  • When putting blocks together, try to avoid creating compound edges.
  • Take care of the joints by hand or with a shovel; if the surface is still rough, use block-corner abrasives on the corners. 

If you need help with anything else please feel free to call us on

020 xxxx xxxx